MULTI CAL STEADY REST

RANSOM MULTI CAL. STEADY REST

Ransom International Corporation has been serving the worldwide shooting industry since 1968. The company’s principal product, the Ransom “Master Series” Rest, has literally become the worldwide standard for handgun accuracy development. It has been used by the United States government agencies for years to test and develop handguns. We are justifiably proud of the reputation our product has developed internationally over the years. We pledge to you, our
customers, that we will continue to develop and produce products of high quality and precision. Made in USA!

Made in USA

What's So Special About the Ransom Multi Cal. Steady Rest?

Everything in the Ransom Multi Cal. Steady Rest is designed to bring the pistol and rifle enthusiast a tool that is trusted to deliver a safe, accurate and dependable shooting experience. This product is proudly made in the United States for use both here and abroad. We back this product with instruction manuals, online video and phone support. It is our goal to have our customers’ needs and expectations met or exceeded. Check our website for adapters, upgrades and options for this product. This machine was designed to be as adaptable and adjustable as possible to support the widest range of firearms. If you have an idea for improvements or changes, please contact us.

Section 1: General Features

THE GENERAL FEATURES

The V-Block is machined to allow a wide range of barrels, stocks and pistol frames to be supported while being cushioned by the leather to prevent harmonic vibrations and damage to firearm.

On Steady Rest with bare finish, the owner can leave the aluminum as is or use any coating they desire. Paint, camo, Cerakote, powder coat, vinyl overlay and many other options that are applicable to aluminum can be used. This allows for customization and personalization while keeping the price reasonable.

On Steady Rest with optional powder-coat finish, the Rest is protected with a strong finish and will require only a light wipe down after use. The Steady Rest is designed to be easy to carry and will also tilt into and fit in a standard .50 cal. ammo box perfectly, allowing it to be packed with other useful items when shooting.

COMPONENTS

SET UP

Assembly

Carefully remove and unwrap components from box. Inspect components for damage. Each Steady Rest is assembled and inspected before packing and shipment. Contact Ransom International if any issues are found.
Remove the three (3) screws from the upright. Next, using the three (3) screws, install the upright to the base with logo toward shooter for revolvers, and away from shooter for semiautomatics. Tighten the three (3) screws in upright, using the 5/32 short-arm hex key provided. Pad can be mounted side-to-side or front-to-rear. No other assembly is needed; your Steady Rest is ready to use. 5. RANSOM INTL. CORP. V-Block Adaptor for Guns w/ Laser Leather V-Sock & High Density Pads AVAILABLE OPTIONS Rear Bunny or Rabbit Ear Bag

AVAILABLE OPTIONS

Section 2: Steady Rest Use

USING STEADY REST ON BENCH OR OTHER FLAT SURFACE

Set Steady Rest on surface, making sure it does not rock or tilt. Upright should be toward target, with pad toward shooter. Clear your firearm of all ammunition.

Place cleared pistol or rifle on Steady Rest and check for comfort and elevation toward target. Adjust front V-Block up or down by loosening both lever locks and sliding to desired height.

Finger tighten sufficiently to hold V-Block in position (do not overtighten). Recheck elevation

REMOVABLE FEET

Multi Cal comes stock with adjustable and removable rubber feet

MOUNTING STEADY REST ON TRIPOD OR MONOPOD

There are 3 options for mounting the Steady Rest to a tripod or monopod.

Base – The base is threaded the common 1/4” -20 on the underside to allow mounting a standard quick connect to a tripod. It can also be permanently mounted if the owner desires. This is best for pistol use to allow support of the shooter’s hand.

2. Upright – The upright is threaded with the common 1/4” -20 on the underside to allow mounting a standard quick connect to a tripod. It can also be mounted to a monopod or threaded walking stick. Mounting this way will still allow fine elevation adjustments using the V-Block.

3. V-Block – The V-Block is threaded with the common 1/4” -20 on the underside to allow mounting a standard quick connect to a tripod. It can also be mounted to a monopod or threaded walking stick.

STORING THE STEADY REST

You can store your Steady Rest in a standard military issue .50 cal. ammo box. To place the Steady Rest into an ammo box, place rear of the Rest into the box with front tilted up.

Ensure that the rear is against the rear wall, then tilt front down into box. To make Steady Rest very secure, adjust the V-Block up so that light contact is made with the lid when the lid is fully locked down.Towels or cardboard can be used to shim Steady Rest and protect from scratching.

ACCOMMODATING LONGER BARRELS

V block can be mounted towards rear ( standard ) for semi autos or towards the front ( opposite ) for revolvers.

Section 3: Care and Cleaning

PROPER CARE AND CLEANING

Disassembly is not necessary for normal service.
The main American aluminum parts should not require much maintenance; simply clean before storage. A light coat of WD-40 or oil will ensure a lifetime of service.
The Steady Rest can handle reasonable amounts of moisture and dirt. Wipe off any contaminants using a soft, dry towel. The leather surfaces should be kept as clean and dry as possible to prevent the transfer of contaminants to the firearm.
Treat all hardware as you would a quality rifle. Lubricate regularly to protect finish and prevent corrosion.
Wipe excess oil from the Rest and store in a dry atmosphere. It will tilt in and fit perfectly in a standard .50 cal. ammo box.

Notes and Tips

The Steady Rest can be used while shouldering a
rifle, with a sandbag at the rear, or when using our Master Series Rear Rest.
The Steady Rest will accommodate most typical hunting and sporting rifles. If your rifle is designed for bench-rest shooting and is mounted in a much larger stock, it may not fit the V-Block.
Gripping the rifle securely, ensure the V-Block firmly cradles the rifle’s forend. Any movement to the side will cause inaccuracy. Rifle should be supported so all movement is limited to fore/aft recoil only.

The Steady Rest can be used while holding a pistol, using the pad to support the grip/magazine area. Or, if the pistol does not extend below the shooter’s hand(s), the pad can be used to provide support to the hand itself.
If horizontal target adjustment is desired, it is better to move the Steady Rest instead of tilting the firearm in the V-Block. Tilting will not support fully and can expose the firearm to a “sharp edge” that will rub during recoil.
Our main goal is to provide a steady rest platform, ensuring that your rifle can be returned to the same start position (battery) each time.
The Steady Rest was designed for practice shooting and to provide a useful, economical platform for new and experienced shooters alike.
While the Steady Rest was designed to test for basic repeatability and accuracy while teaching basic firearms handling, we would recommend our other products specifically designed for serious testing.

Section 4: Warranty and Safety Info.

RANSOM MULTI CAL. STEADY REST WARRANTY

Ransom Multi Cal. Steady Rest is warranted against defective parts and or defective craftsmanship for a period of one (1) year. A Return Merchandise Authorization (RMA) number is required in order to send any products back for any reason. If you should have a problem with your unit, or any other products, please call Ransom International at (928) 778-7899 or via email.

Please keep your receipt or invoice. Proof of purchase will be required for any warranty work to be performed. Warranty work will not be performed without proof of purchase.